|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Monel 400 |
| *trademark Huntington Alloys |
|
|
|
|
|
|
|
|
|
|
|
| Monel 400 alloy is a nickel copper alloy which has high strength over a wide temperature range up to 1000 F. Springs made from Monel 400 can be used in corrosive conditions at temperatures as high as 450 F. This alloy is excellent in brackish water under high velocity conditions. Corrosive rates in agitated airated sea water usually do not exceed 1 mpy. A common specification is ASTM B 164. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Comp. % |
| 63.0 min. |
| 2.5 max. |
| 2.0 max. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Comp. % |
| .3 max. |
| 28.0-34.0 |
| .50 max. |
| .024 max. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Density/lbs/cu in. |
| Modulus of elasticity,psi |
| Tension |
| Torsion |
| Poisson Ratio |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| .319 |
|
| 26,000,000 |
| 10,000,000 |
| .32 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Tensile |
| Annealed |
| Cold Drawn Hard Drawn |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 80-100,000 psi |
| 140-165,000 psi |
|
|
|
|
|
|
|
|
|
| The information and data presented herein are typical or average values and are not guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. |
|
|
|
|
|
 |
|
 |
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
| PHONE (203)281-1522 // FAX (203)287-0851 OR (800)611-9993 |
| OR E-MAIL hmsinc@hamdenmetal.com |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|