|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| I625 Alloy is a non-magnetic ally which has good corrosion resistance against oxidation and resists corrosive attack by other media, It is vertually uneffected by clorides. This makes it an excellent choice for sea-water applications. Its has high tensile, creep, and ruture strength. It holds its strength from cryogenic temperatures thru 1800 F |
|
|
|
|
|
|
|
|
|
|
|
|
| Elements |
| N |
| Cr |
| Fe |
| Mn |
| Cb & Ta |
| Ti |
| Al |
|
|
|
|
|
|
|
|
|
| Comp. % |
| Balance |
| 20.0-23.0 |
| 5.0max. |
| 0.5 max. |
| 3.15-4.15 |
| 0.40 max. |
| 0.40 max. |
|
|
|
|
|
|
|
|
|
| Elements |
| C |
| Cu |
| Si |
| S |
| Co |
| Mo |
| P |
|
|
|
|
|
|
|
|
|
| Comp. % |
| 0.10 max. |
| 0.50 max. |
| 0.50 max. |
| 0.015 max. |
| 1.0 max. |
| 8.0-10.0 |
| 0.015 max. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Density/lbs/cu in. |
| Modulus of elasticity,psi |
| Tension |
| Torsion |
| Poisson Ratio |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| .305 |
|
| 30,000,000 |
| 11,000,000 |
| .31 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Tensile |
| Annealed |
| Cold Drawn Hard Drawn |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 120-150,000 psi |
| 220-240,000 psi |
|
|
|
|
|
|
|
|
|
| The information and data presented herein are typical or average values and are not guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. |
|
|
|
|
|
 |
|
 |
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| PHONE (203)281-1522 // FAX (203)287-0851 OR (800)611-9993 |
| OR E-MAIL hmsinc@hamdenmetal.com |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|