|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| N200 is a commercially pure material with good mechanical properties and resistance to a range of corrosive media. N200 is used in areas where product purity needs to be maitained. It also has good thermal, electrical, and magnostrictive properties. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Comp. % |
| 99.0 min. |
| .40 max. |
| .35 max. |
|
|
|
|
|
|
|
|
|
|
|
|
| Comp. % |
| .15 max. |
| .25 max. |
| .35 max |
| .010 max. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Density/lbs/cu in. |
| Modulus of elasticity,psi |
| Tension |
| Torsion |
| Poisson Ratio |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| .321 |
|
| 29,000,000 |
| 11,700,000 |
| .26 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Tensile |
| Annealed |
| Cold Drawn as Drawn |
| Cold Drawn Hard Drawn |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 55-60,000 psi |
| 60-85,000 psi |
| 85-115,000 psi |
|
|
|
|
|
|
|
|
|
| The information and data presented herein are typical or average values and are not guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
| PHONE (203)281-1522 // FAX (203)287-0851 OR (800)611-9993 |
| OR E-MAIL hmsinc@hamdenmetal.com |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|